-
Slide clamp half model, locked with one ball clasp and a lock for the T-slot track.
The minimum quantity for sale is five pieces.
It can be mounted without tools and washed and disinfected in the dishwasher.
Medical Rail Clamps, Sliding Clamps.
Medical rail clamps attach hospital equipment to the equipment rail on the wall or bedside panel.
This Medical rail Clamp JB 120-00-00 fits only for:
SCANDINAVIAN 10x30 mm medical rails.
Specifications:
Height: 61,5 mm.
Width: 45 mm. (Without arm)
Width: 64 mm. (With arm)
Depth: 25 mm.
Material: Aluminium
Weight: 0,118 kg.
Track width: Approx. 30 mm.
Track depth: Approx. 5 mm.
Material: Aluminium. (Ceramic Coating)
Colour: H-151 "Satin Aluminium"
Gloss: Satin 35-50 my
Country of origin: Danish
Registered with the Danish Medicines Agency: Yes
HS Code: 76042990
Brand: JB-Medico
The bracket is used in many places for different solutions:
1. For. glove box holder and gas bottle holder
2. For wire basket or catheter container
3. Medical equipment is easily mounted on one of the two flat threaded hole patterns.
4. The profile fits all our needle box holders
5. Alcohol dispenser with Adapter fittings, T-track & drip trays
Durability, hygiene, and rail-mounted
Made of necessity – designed to last.
Slide clamp half model, locked with 1 ball and T-slot lock
JBM Medical Equipment Rail, hygienic design 10x30 mm DK Standard. |
|
|
Bracket for Sharps containers, round, Ø134 mm. for 1,0- 1,3-1,5-2,0-3,0 Liter. |
|
|
Equipment Rail, Scandinavian Standard 10x30 mm. |
|
|
Catheter container holder 400 mm. T-slot holder |
|
|
Wire basket 6 L, conical, hook for T-slot. |
|
|
Wire basket 7 L, conical, T-slot hook |
|
|
Wire basket 15 Liters, conical, hook for T-slot |
|
|
Bracket for Sharps containers, 0.7 & 1.5 Litre, Ø100mm. JB 255-00-00 |
|
|
Adapter T-Slot Bracket, Wet Wipe Wall Mount, Drip Tray, Soap & Alcohol Dispensers |
|
|
Dispenser, 10 cm arm, drip tray and adapter bracket for 1litre bags |
|
|
Dispenser, 14 cm arm, drip tray and adapter bracket |
|
|
With "New HandsUp", the staff can finally see the sizes of the gloves that are always written out on the sides of the boxes! |
|
|
4-Position Transducer Mount, with a guide for a T-track, aluminium |
|
|
IV Hook stainless steel, infusion bags. |
|
You might also like
GCX-rail bracket with a T-slot
Multibracket with a T-slot bracket, fit from 16-41 mm
Slide clamp half model, locked with one ball clasp, and a T-slot track.
Slide clamp half model, with one ball clasp and T-slot track.
T-slot bracket for multi-bracket
T-Slot Wall bracket with a hole for side-locking, etc. glove box holder
T-Slot Wall brackets for glove box holder and dispensers etc.
16 other products in the same category:
Rail Clamp, half model, locked with two socket screws
Rail Clamp, half model, locked using one-ball clasp, Ø20 mm. hole
Slide clamp for medical lamps with one ball clasp and plastic bush hole Ø16 mm.
Slide clamp for medical lamps with ball clasp and Ø18 mm hole
Rail Clamp, wide model, locked with one ball lock
Slide clamp half model, locked with one ball clasp, and a T-slot track.
Rail Clamp, an extra-wide model, is locked using four grub screws
Rail Clamp, wide model, locked with one ball lock
Rail Clamp, wide model with one-ball clasp and fixing device, Ø18 mm. hole
Rail Clamp, wide model, locked using two socket screws, Ø18 mm hole.
Rail Clamp, wide model, locked using two socket screws
Slide clamp half model, locked with one ball clasp
Rail Clamp, wide model with two-ball clasp with fixing device and brass bush, Ø20 mm. hole
Slide clamp, a wide model with a two-ball clasp with fixing device, Ø18 mm. hole.
Slide clamp half model, locked using two socket screws, Ø20 mm. hole
Slide clamp for medical lamps with one ball clasp and plastic bush hole Ø9,6 mm.
Dansk
English
Español
