-
T-slot bracket for multibracket. Suitable for multibrackets.
The minimum quantity for sale is 20 pcs.
It can be mounted without tools and washed and disinfected in the dishwasher.
Includes 2 x Stainless A2 M6x4 screws.
The bracket is used in many places for different solutions:
1. On a multi-claw, e.g. glove holder and gas bottle holder
2. Bracket for multi-claw for infusion brackets on pipe profiles for wire basket or catheter container
3. Medical equipment is easily mounted on one of the two flat threaded hole patterns
4. The profile fits all our needle box holders
5. Alcohol dispenser with Adapter fittings, T-track and drip trays
Accessories:
T-track brackets for the multi-claw holes only fit there.
External specifications:
Height: 60 mm.
Width: 36 mm. External
Depth: 30 mm. Inside
Weight: 36 grams
Material: Aluminum
Country of origin: Danish
HS Code: 76042930
Brand: JB-Medico
Made of necessity – designed to last.
T-slot bracket for multi-bracket. Suitable for 1 piece. multibracket
Bracket for Sharps containers, round, Ø134 mm. for 1,0- 1,3-1,5-2,0-3,0 Liter. |
|
|
Wire basket 6 L, conical, hook for T-slot. |
|
|
Adapter T-Slot Bracket, Wet Wipe Wall Mount, Drip Tray, Soap & Alcohol Dispensers |
|
|
With "New HandsUp", the staff can finally see the sizes of the gloves that are always written out on the sides of the boxes! |
|
|
Dispenser, 14 cm arm, drip tray and adapter bracket |
|
|
Multibracket can be turned upside down, fit from 16-41mm. |
|
|
Multibracket with a fixing device, Ø18 mm. hole |
|
|
Double Multibracket for mounting, e.g. bed IV pole. |
|
|
Multibracket with 2xØ6 clearance holes. Fit from 16-41mm. |
|
|
Multibracket with 2XØ6 clearance holes, fit from 16-41 mm. |
|
|
Catheter container holder 400 mm. T-slot holder |
|
|
Wire basket 7 L, conical, T-slot hook |
|
You might also like
GCX-rail bracket with a T-slot
Multibracket with a T-slot bracket, fit from 16-41 mm
Slide clamp half model, locked with one ball clasp, and a T-slot track.
Slide clamp half model, with one ball clasp and T-slot track.
T-Slot Wall bracket, 2 glove box holder, Aluminium
T-Slot Wall bracket, 3 glove box holders, Aluminium
T-Slot Wall bracket, 4 glove box holders, Aluminium
T-Slot Wall brackets for glove box holder and dispensers etc.
16 other products in the same category:
GCX-rail bracket with FIXING DEVICE, Ø18 mm. bushing hole, JB 820-625-18
Sharps Container Brackets, round, Ø280 mm. hole, Stainless Steel
Suction cup 230 ml conical in stainless steel
Suction cup 330 ml conical in stainless steel AISI 304
Record folder tray, stainless steel, AISI 304
Slide clamp half model, locked with one ball clasp
Rail Clamp, an extra-wide model, is locked using four grub screws
End caps for JBM Medical Equipment Rails, left side
Sharps Container Brackets, square, 101x147 mm. hole 7,5 litre, Stainless Steel
Rail Clamp, wide model, locked with two ball locks
Slide clamp half model, locked with one ball clasp
Multibracket, aluminium, fit from 16-41 mm.
FIXING DEVICE FOR RAIL CLAMPS AND MULTI BRACKETS, Ø18 mm. HOLE
Oxygen & Gas cylinder holder, Top, Ø140 mm. hole, Stainless Steel
Double Multibracket for mounting, e.g. bed IV pole
GCX-rail bracket with FIXING DEVICE, Ø20 mm bushing hole
Dansk
English
Español
