-
Fixing device or rail clamps and multi-brackets, Ø18 mm hole.
Minimum quantity for sale: 2 pcs.
Please check the diameter of the lamp shaft, which is typically one of the three diameters below.
Accessories separately purchased
Handles purchased separately: (JB 94-00-00)
The sizes of the plastic bushings were purchased separately.
JB 128-00-09 (Ø9.6 mm.)
JB 128-00-01 (Ø13 mm.)
JB 127-00-01 (Ø16 mm.)
External specifications:
Height: 61.5 mm.
Width: 36 mm.
Depth: 35.6 mm.
Weight: 171 grams.
Hole: Ø1 mm. (Without bushing)
Material: Aluminium
Country of origin: Danish
Registered with the Danish Medicines Agency: Yes
HS Code: 76042990
Brand: JB-Medico
JB 205-00-18 is assembled with a claw used for
1. IV-Pole on bedside wall pane
2. Flat-screen ar
3. Medical equipment
4. Medical light
5. Column tube/rods
Medical Rail Clamps, Sliding Clamps Medical rail clamps:
For attaching hospital equipment, medical rail clamps are used to secure the equipment rail located on the wall or bedside panel.
Durability, hygiene, and rail-mounted.
JB-Medico makes a difference in the design and advice of hygienic suspension solutions for:
Healthcare, food and pharmaceutical industry.
Hospitals, medical centres, chiropractors and dentists.
Physiotherapists, schools and laboratories.
JB-Medico adapts solutions to meet the needs of all clinical departments.
Fixing device for rail clamps and multi brackets, Ø18 mm hole.
Rail Clamp, a wide model with one ball clasp and three pcs. Countersunk Ø6,6 mm. Holes. |
|
|
Pom bushings, hole size Ø16 mm |
|
|
Pom bushings, hole size Ø9.6 mm. |
|
|
Rail Clamp, wide model, locked using two socket screws with three pcs. countersunk Ø6,6mm holes. "Prepared for suspension.” |
|
|
Pom bushings, hole size Ø13 mm. |
|
|
Rail Clamp, a wide model with a two-ball clasp and three pcs. countersunk Ø6,6 mm. holes. |
|
|
Stainless adjustable handle M6X20 mm. |
|
|
Slide clamp half model, locked with one ball clasp. Countersunk Ø6,6mm holes. |
|
|
Rail Clamp, half model, locked with two socket screws. Locks with two pin screws. |
|
|
Rail Clamp, wide model, locked with one ball lock. Three pcs. Countersunk holes Ø6,6 mm. |
|
|
Rail Clamp, wide model, locked using two socket screws. Three pcs. countersunk holes Ø 6,6 mm. |
|
|
Rail Clamp, wide model, locked with two ball locks and three pcs. Countersunk holes Ø 6,6 mm. |
|
|
Multibracket with 2XØ6 clearance holes, fit from 16-41 mm. |
|
You might also like
Fixing device, slide clamps & multi-brackets, Ø25 mm. hole
GCX-rail bracket with FIXING DEVICE, Ø18 mm. bushing hole, JB 820-625-18
Multibracket with a fixing device, Ø18 mm. hole
Rail Clamp, half model, locked using two socket screws with fixing device, Ø18 mm. hole
Rail Clamp, wide model with one-ball clasp and fixing device, Ø18 mm. hole
Rail Clamp, wide model with one-ball clasp and fixing device, Ø18 mm. hole
Rail Clamp, wide model, locked using two socket screws, Ø18 mm hole.
Rail Clamp, wide model, locked using two socket screws, Ø18 mm. hole.
Slide clamp for medical lamps with ball clasp and Ø18 mm hole
Slide clamp half model, locked using one ball claps, Ø18 mm hole
Slide clamp, a wide model with a two-ball clasp with fixing device, Ø18 mm. hole
Slide clamp, a wide model with a two-ball clasp with fixing device, Ø18 mm. hole.
16 other products in the same category:
Telescopic pole, 1.500 mm, fits, e.g. rail clamps, in stainless steel (AISI 304)
Wire basket 15 Litre, conical, hook for T-slot, Stainless Steel
IV 4-Hooks for infusion bags, AISI 304
Manuel extension monitor arm, stainless steel
Oxygen & Gas cylinder holder, Top, Ø117 mm. hole, Stainless steel
Bracket Ø100, for 2 L suction canister, Ø100 mm hole, stainless steel
Scoop holder in black POM and stainless steel for Olympus Scopes
Adjustable handle M6X20 mm, stainless steel
JBM Equipment Rail, hygienic design 10x30 mm. Scandinavian Standard
Suspension Tray for medical equipment, Stainless Steel, Ø20 mm
Hand Sanitizer Dispenser, 10 cm arm with drip tray & bracket – Stainless Steel
IV Tubing Holder with a guide for T-track Brackets, Aluminium
Column tube, Stainless Steel, Ø20 X 600 mm. JB 29-00-00
Suction cup 500 ml conical in stainless steel
Keyboard Tray, Hand Support, Stainless Steel, Ø20 mm.
Suction cup 330 ml conical in stainless steel AISI 304
Dansk
English
Español
